Flaming-river Vega Box Centering Manual do Utilizador descarregar pdf

021805

800 Poertner Drive

Berea, OH 44017

1-800-648-8022

www.flamingriver.com

TECHNICAL BULLETIN # 1001

STEERING BOX CENTERING INSTRUCTIONS – FR1500/FR1500Q STEEL VEGA BOX, FR1500C/FR1500CQ

CHROME VEGA BOX

WARRANTY: ONE (1) YEAR FROM DATE OF PURCHASE. REPLACEMENT OR REPAIR OF PRODUCT DEEMED

DEFECTIVE BY THE FACTORY.

ANY LABOR INCURRED IS SPECIFICALLY EXCLUDED.

WEIGHT

:12lbs.

IMPORTANT!!! It is critical that the steering box be at the center position BEFORE installation. Incorrect

centering will cause loose steering and premature wear. (Refer to picture to align paint dots.)

20:1 RATIO GEAR BOX – FR1500, FR1500C

NOTE: All boxes are pre-lubricated and pre-adjusted to factory specifications.

NOT

ADJUST THE STEERING BOX!!!

1) Place the steering box in a bench vise and be certain the box is held securely.

2) Attach a 5/8”-36 u-joint to the pinion input shaft.

3) Turn the shaft to the right (clockwise) all the way to the right lock.

4) Turn the shaft to the left (counterclockwise) all the way to the left lock. (approx. 5 turns)

5) Turn the shaft to the right (clockwise) half the number of turns. (approx. 2-½ turns) You should feel

the box tighten when at the center.

6) The wide spline on the sector shaft will align with the dot dimple above the center of the sector shaft

area of the box casting.

16:1 RATIO GEAR BOX – FR1500Q, FR1500CQ

1) Place the steering box in a bench vise and be certain the box is held securely.

2) Attach a 5/8”-36 u-joint to the pinion input shaft.

3) Turn the shaft to the right (clockwise) all the way to the right lock.

4) Turn the shaft to the left (counterclockwise) all the way to the left lock (approx. 4 turns)

5) Turn the shaft to the right (clockwise) half the number of turns. (approx 2 turns) You should feel the

box tighten when at the center.

6) The wide spline on the sector shaft will align with the dot dimple above the center of the sector shaft

area of the box casting.

Paint stripe

indicates

centered shaft.

Paint may or

may not be on

box.

Pinion Shaft

Size:

5/8”-36

Pitman Shaft

Thread:

¾”-16

Warranty Disclaimer

Because of their intended usage, the manufacturer makes

no warranties whatsoever expressed or implied, oral or

written, to purchasers of their products regarding

performance, safety, fit, merchantability or length of service.

Purchasers are responsible for selection of proper goods

and must rely on their own skill or judgment that such goods

are suitable for the purchaser’s application.

DEFECTIVE BY THE FACTORY 1

Resumo do Conteúdo

Página 1 - DEFECTIVE BY THE FACTORY

021805 800 Poertner Drive Berea, OH 44017 1-800-648-8022 www.flamingriver.com TECHNICAL BULLETIN # 1001 STEERING BOX CEN

Comentários a estes Manuais

Sem comentários

Flaming-river Vega Box Centering Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Flaming-river Vega Box Centering. Flaming River Vega Box Centering User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Flaming-river Vega Box Centering